Home Standby Generators
Features and Benefits
Breakthrough Design, Advanced Technology
Generac® air-cooled generators offer the most wattage and greatest starting power in their class. The Generac 16 kW can start a 5-ton* and 3-ton A/C unit or two 4-ton units. The 13 kW can start a 4-ton and the 10 kW can start a 3-ton.
Quiet-Test™ (16 kW model only)
Reduces noise to a whisper by lowering engine speed during the generator’s weekly self-test. The Quiet-Test sound level is comparable to a car at idle and is up to 50% quieter (59 dBA) than competitive models.
OHVI® Industrial Engine
Generac's OHVI® (Overhead Valve Industrial) engines have been specifically designed for generator demands. These engines offer the finest lubrication technology available, providing instantaneous distribution of lubricant to all moving engine parts. They also feature an automotive spin-on oil filter for simplified routine maintenance.
Vibration Isolation
Standard vibration isolators virtually eliminate transmission of vibration from the unit to the mounting surface.
Closed Recovery Cooling System
This closed, pressurized system virtually eliminates the introduction of air into the cooling system. Rust and fluid acidity are minimized, resulting in longer engine life.
Solid-State Sensing and Starting Control
Provides the ultimate in engine protection. The magnetic pickup senses overspeed, automatically shuts down the engine, disconnects the starter motor and prevents re-engagement. The system also provides cyclic cranking for improved starting reliability and cranking termination for starter motor protection.
Superior Electrical Protection
The air-cooled 10, 13 and 16 kW models feature an electronic governor, which maintains steady speed and eliminates voltage drop when loads are applied. This, as well as the automatic voltage regulator, provides a smooth rate of electricity, which is especially important for sensitive electronic devices such as computers.
Superior Paint
Our textured, powder coat paint process provides consistent coverage and better bonding to seams and exposed edges providing durability and a long-lasting, tough finish.
Aluminum Enclosure (optional on 16 kW model – standard on 18 kW model)
Generac's 16 kW model is available in an all aluminum enclosure to better withstand the corrosive effects of salt air. This option is especially important for homes in southern and coastal communities.
Automatic Exerciser
An automatic weekly self test of your system ensures that your generator is in peak operating condition at all times.
Automatic Transfer Switch Fully Automatic Operation
Generac standby generators continually monitor utility power. When the utility fails, the generator starts and signals the automatic transfer switch to lock out the utility and allow electricity from the generator to power the home. When utility power returns, the automatic transfer switch will lock out power from the generator and restore utility power. The generator will shut itself off and wait for the next power outage. Because it's automatic, you never have to worry about a power outage, even when you're away from home.
Convenient Fuel Supply
Generac generators operate on natural gas or LP gas service. This Natural gas operation provides you with unlimited run time during extended utility power failures.
Maintenance Friendly
All Generac air-cooled models feature a hinged top and removable front panel for fast and easy access for maintenance and service.
Automatic Safety Shutdowns
Automatic safety shutdowns protect the engine and generator in the event of low oil pressure, high coolant temperature, overspeed and/or overcrank.
Sound Attenuated Enclosure
Generac air-cooled automatic standby generators feature weather resistant, rodent proof and sound attenuated enclosures as standard equipment.
Battery Charger
A built-in battery charger ensures that the battery remains at an optimum performance level.
Easy Installation
Generac's standby generators offer the fastest and easiest installation available. All connections within the generator and transfer switches are easily accessible and clearly marked. Our optional load center transfer switches and connection boxes are pre-wired for even easier installation.
UL-Listed
All Generac standby generators are UL 2200 listed and our transfer switches are UL 1008 listed. UL listing verifies the kilowatt ratings of our generators and is your assurance that Generac standby systems meet the highest safety standards.
EPA and CARB Emission Requirements
The Environmental Protection Agency and the California Air Resources Board establish emissions requirements for generators up to 25kW. All Generac generators comply with EPA and CARB requirements.
Made in USA
Generac generators are made in the United States by Generac Power Systems Inc. We design and manufacture all of the major components including the alternators, controls, enclosures, and our OHVI air-cooled engines. This unprecedented degree of control ensures that Generac products are built to the highest standards for quality, reliability and durability.
* May not start all brands or models of central air conditioners. Make sure the surge capability (Amps) of the generator is greater than the LRA listed on the data plate of the A/C before purchasing.
|
